Fike Twinflex Multipoint ASD Detector with Sounder

£31.22 ex. VAT - £37.46 inc. VAT

Key Features:

  • 7 modes of fire detection including combined smoke/heat
  • Optional built-in sounder and/or strobe in a single device
  • Self-calibrates every 6 hours
  • Continuously monitors for dust contamination
  • Easily removable for maintenance at height

Modes of Detection:

Smoke 1: Used where ionisation detectors are normally fitted, especially when there are high ceilings or a risk of free burning fires (chemical stores etc.) or fires that need to be detected extremely quickly.
Smoke 2: Used where optical detectors are normally fitted, when there is a risk of a smouldering fire and for escape routes.
Smoke 3: Designed for use in areas that are prone to nuisance alarms. The reduced sensitivity linked with a time delay feature, means that a higher concentration of smoke needs to be present for a constant time period, before a fire decision is made. For example, this setting is ideal for hotel bedrooms with en-suite shower rooms. The installer or service engineer can change the setting from smoke 2 to smoke 3 if nuisance alarms are a problem whilst still offering optimum protection of a smoke detection setting.
Heat 1 (Rate of Rise): Used where a standard rate of rise detector would normally be used.
Heat 2 (Standard Fixed Temperature – 58ºC approx.): Used where a standard fixed temperature heat detector would normally be fitted, suitable for kitchens etc.
Heat 3 (High Fixed Temperature – 90ºC approx.): Used where a high fixed temperature heat detector would normally be fitted. Suitable for commercial kitchens, boiler rooms etc.

Contact Us Via WhatsApp

10 in stock (can be backordered)


Using the ASD Multipoint detector with sounder and/or strobe as part of the TWINFLEXpro 2-wire fire alarm system means that when a detector is wired in, so is an optional sounder, with no extra wiring required. This greatly reduces the number of points that need to be installed – and the time it takes to install! In fact, with the TWINFLEXpro exclusive 2-wire design, installation savings can be as high as 40%. Multipoint offers 7 different modes of detection, which means one device can suit multiple applications. Whatever type of detection is required, it can be selected with an easy flick of a switch at the time of commissioning.

Sounders can be run on the same pair of wires as detectors and/or call points
No extra devices needed for audible warning
Can differentiate between call point, smoke and heat alarms
Two sound volumes easily selectable by dil switch
Using patented, advanced optical scatter sensor design and sophisticated electronic technology, Fike delivers reliable smoke and/or heat detection significantly reducing the risk of nuisance fire alarms.